Get Appoinment
Location » Home » Grades > Stainless Steels > X10CrAl7,1.4713,X10CrAlSi7

DIN X10CrAl7,1.4713,X10CrAlSi7 Enquiry | Print this page

DIN X10CrAl7,1.4713,X10CrAlSi7 Details

Heat resisting steels and nickel alloys

Application    

X10CrAl7,1.4713,X10CrAlSi7 is a ferritic heat-resistant steel showing resistance to sulfur compounds, reducing and carburizing gases, which can operate in temperatures up to 800 in a non-aggressive environment.It is used in the production of load-bearing elements, parts of steam boilers, construction of soot blowers, supports for heaters, hubcaps, sliding rails, chains and sieves, parts in the automotive, energy and metallurgical industries.

Similar Steel Grades

4713, SICROMAL, X 10 CRAL 7, X 10 CRALSI 7, X10CRSI6, X 10 CRSI 6, 1.4712, CSN 17113, 15CH6SJU, 15Х6СЮ, 10ALCR70.

DIN X10CrAl7,1.4713,X10CrAlSi7 Standard Download

X10CrAl7,1.4713,X10CrAlSi7 Datasheet
DIN X10CrAl7,1.4713,X10CrAlSi7

Tags

X10CrAl7,1.4713,X10CrAlSi7 Application:Heat resisting steels and nickel alloys
Category Type Grade Microstructure Designations
Grades Stainless Steels X10CrAl7,1.4713,X10CrAlSi7 Ferrite Germany - DIN , EN 10088-1 - Stainless steels - Part 1: List of stainless steels
EN 10095 - Heat resisting steels and nickel alloys
Chemical composition(mass fraction)(wt.%)
Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.12
Si 0.50 1.00
Mn - 1.00
P - 0.045
S - 0.015
Cr 6.00 8.00
Ni - -
Al 0.50 1.00
Mechanical properties of grade X10CrAl7,1.4713,X10CrAlSi7
Proof strength
Rp0.2 (MPa)		 Tensile strength
Rm (MPa)		 Impact energy
KV (J)		 Elongation at fracture
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
446 (≥) 222 (≥) 23 31 21 Solution and Aging, Annealing, Ausaging, Q+T,etc 124
Physical properties of grade X10CrAl7,1.4713,X10CrAlSi7
Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm		 Modulus of elasticity
kN/mm2		 Expansion rate
196 (≥) 162 (≥) 12 34 33 Solution and Aging, Annealing, Ausaging, Q+T,etc 141
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2
847 919 972
X10CrAl7,1.4713,X10CrAlSi7 Range of products
Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
X10CrAlSi7 B.S. UK
Heat resisting steels and nickel alloys
1.4713 B.S. UK
Heat resisting steels and nickel alloys
X10CrAl7,1.4713,X10CrAlSi7 DIN Germany
Heat resisting steels and nickel alloys