B.S. 1.4713 Enquiry | Print this page
B.S. 1.4713 Details
Heat resisting steels and nickel alloys
B.S. 1.4713 Standard Download
1.4713 Datasheet
B.S. 1.4713| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 1.4713 | UK - B.S. , BS EN 10088-1 - Stainless steels - Part 1: List of stainless steels BS EN 10095 - Heat resisting steels and nickel alloys |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.12 | ||
| Si | 0.50 | 1.00 | ||
| Mn | - | 1.00 | ||
| P | - | 0.045 | ||
| S | - | 0.015 | ||
| Cr | 6.00 | 8.00 | ||
| Ni | - | - | ||
| Al | 0.50 | 1.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 356 (≥) | 523 (≥) | 14 | 12 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 128 (≥) | 254 (≥) | 14 | 13 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 842 | 758 | 285 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X10CrAlSi7 | B.S. | UK | Heat resisting steels and nickel alloys |
| 1.4713 | B.S. | UK | Heat resisting steels and nickel alloys |
| X10CrAl7,1.4713,X10CrAlSi7 | DIN | Germany | Heat resisting steels and nickel alloys |