DIN Aluchrom 4 18 YHf Enquiry | Print this page
DIN Aluchrom 4 18 YHf Details
Aluchrom 4 18 YHf
DIN Aluchrom 4 18 YHf Standard Download
Aluchrom 4 18 YHf Datasheet
DIN Aluchrom 4 18 YHfCategory | Type | Grade | Designations |
---|---|---|---|
Grades | Stainless Steels | Aluchrom 4 18 YHf | Germany - DIN , |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
Ni | - | 0.5000 | ||
Cr | 17.0000 | 19.0000 | ||
C | - | 0.0800 | ||
S | - | 0.0300 | ||
Mn | - | 0.5000 | ||
Si | - | 0.6000 | ||
Al | 3.5000 | 5.0000 | ||
Y | - | 0.1500 | ||
Zr | - | 0.1500 | ||
Hf | - | 0.1500 | ||
P | - | 0.0400 | ||
Cu | - | 0.5000 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
824 (≥) | 162 (≥) | 23 | 22 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
155 (≥) | 728 (≥) | 42 | 11 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
391 | 636 | 618 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
Aluchrom 4 18 YHf | DIN | Germany | Aluchrom 4 18 YHf |
F10004 | AISI | USA | Used in the products of the automobile, truck, tractor, and allied industries. Miscellaneous soft iron castings (as cast or annealed) in which strength is not of primary consideration. Exhaust manifolds may be made of this grade of iron, alloyed or unallo |
G4000 | SAE | USA | Used in the products of the automobile, truck, tractor, and allied industries. Diesel engine castings, liners, cylinders, and pistons. |
G4000a | SAE | USA | Used in the products of the automobile, truck, tractor, and allied industries. Diesel engine castings, liners, cylinders, and pistons. |
00Cr17Ni14Mo2 | GB | China | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
X2CrNiMo18-14-3 | AWS | Germany | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
1.4435 | AWS | Germany | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
Z 3 CND 17-11-02 | DIN | France | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
TS 60 | SS | International | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
00Cr18Ni14Mo2Cu2 | GB | China | 00Cr18Ni14Mo2Cu2 0Cr18Ni12Mo2Cu ultra-low carbon steel, stainless steel 00Cr18Ni14Mo2Cu2 stainless steel is better than 0Cr18Ni12Mo2Cu2 resistance to intergranular corrosion. |
0Cr18Ni13Si4 | GB | China | Seamless stainless steel tubes for boiler and heat exchanger |
1Cr13Mn9Ni4 | GB | China | 1Cr13Mn9Ni4 |
Rene 41 | ASTM | USA | These products have been used typically for parts requiring high strength up to 1600 °F (871 °C) and oxidation resistance up to 1800 °F (982 °C), but usage is not limited to such applications |
4Cr13 | GB | China | Cold rolled stainless steel sheets and plates |
0Cr17Ni4Cu4Nb | GB | China | Stainless steel bars |
4Cr14Ni14W2Mo | GB | China | Heat-resisting steel bars |
5Cr21Mn9Ni4N | GB | China | Heat-resisting steel bars |
1Cr20Ni14Si2 | GB | China | Heat-resisting steel sheets and plates |
4Cr9Si2 | GB | China | Valve steel bars for internal combustion engines - Technical requirements |
4Cr10Si2Mo | GB | China | Heat-resisting steel bars |
Relevant products
-
17-4ph steel wire
-
T30402/X155CrVMo121 Die Steel Sheet
-
1.4980 Round Bar
-
DT413 / 4Cr5MoSiV1MOD
-
1.4980
-
45Cr14Ni14W2Mo forging
-
D6AC Forging Hollow Bar
-
GH 3536 Sheet
-
4145H Hollow Bar
-
Monel400 round bar
-
K93600\1.3912\Invar36\4J36 rod coil strip wire
-
GH 3536 Sheet
-
06Cr19Ni10/S30408/304/S30400/1.4301 Tube
-
S30409/304H/S30409/1.4948 Tube
-
S30403/304L/S30403/1.4307 Tube
-
S30453/304LN/1-4311 Tube
-
S32168/321/S32100/1-4541 Tube
-
S32169/321H/S32109/1-4940 Tube
-
S31608/316/S31600/1.4401 Tube
-
S31603/316L/S31600/1.4404 Tube
Aluchrom 4 18 YHf Equivalent Grade Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry |
17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry |
17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry |
X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
1.4882 strip/sheet/plate stock | 3.5x200x1000-2000mm | Coil or Strip | Kgs | 200 | Cold-Rolled+Annealed | Enquiry |
T45Cr5Si3 Round Bar | Dia.40mm | Round Bar | Kgs | 500 | Hot-Rolled+Annealed+black | Enquiry |
SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |
1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List | Dia.182mm - Dia.510mm | Round Bar | Tons | 120 | Forged+Annealed+black | Enquiry |
1.2344 ESR Round Bar Stock List(2019-9-3) | Select | 0 | Select | Enquiry | ||
Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry | ||
1.2343 ESR Stock list(2019-09-03) | Select | 0 | Select | Enquiry | ||
1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
1.2344 Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
Incoloy800 round bar | Φ115*1400 | Round Bar | Kgs | 169 | Hot-Rolled+Annealed+black | Enquiry |