SAE F 899 Type XM-13 Enquiry | Print this page
SAE F 899 Type XM-13 Details
Standard Specification for Wrought Stainless Steels for Surgical Instruments
SAE F 899 Type XM-13 Standard Download
F 899 Type XM-13 Datasheet
SAE F 899 Type XM-13| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | F 899 Type XM-13 | Precipitation-Hardening | USA - SAE , F 899 (2012) - Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.05 | ||
| Mn | - | 0.20 | ||
| Si | - | 1.00 | ||
| P | - | 0.01 | ||
| S | - | 0.008 | ||
| Cr | 12.25 | 13.00 | ||
| Ni | 7.50 | 8.50 | ||
| Mo | 2.00 | 2.50 | ||
| Al | 0.90 | 1.35 | ||
| N | - | 0.01 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 872 (≥) | 284 (≥) | 44 | 31 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 477 (≥) | 624 (≥) | 32 | 23 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 927 | 349 | 749 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 564 S13800 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S13800 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S13800 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| S13800 | AISI | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
| SA-564 S13800 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S13800 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S13800 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 564 XM-13 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 Type XM-13 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 XM-13 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| A 959 Type XM-13 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| F 899 Type XM-13 | SAE | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| SA-564 XM-13 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 Type XM-13 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 Type XM-13 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| PH 13-8Mo | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
| PH13-8Mo, 1.4534, Alloy 13-8 | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
| PH13-8Mo, 1.4534, Alloy 13-8 | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
| A 564 S13800 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S13800 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
Relevant products
F 899 Type XM-13 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| PH13-8Mo Forgings | Select | 0 | Select | Enquiry | ||
| 0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry | ||
| 15-5PH Forgrd Flat Bar | Select | 0 | Select | Enquiry |