Chromium-nickel-molybdenum stainless construction steel with aluminum additive X3CrNiMoAl13-8-2, 1.4534, PH13-8 Mo, 13-8 Mo precipitation strengthened for use in the aerospace, petroleum and petrochemical industries.
ASTM PH13-8Mo, 1.4534, Alloy 13-8 Enquiry | Print this page
ASTM PH13-8Mo, 1.4534, Alloy 13-8 Details
ASTM PH13-8Mo, 1.4534, Alloy 13-8 Standard Download
PH13-8Mo, 1.4534, Alloy 13-8 Datasheet
ASTM PH13-8Mo, 1.4534, Alloy 13-8Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | PH13-8Mo, 1.4534, Alloy 13-8 | Precipitation-Hardening | USA - ASTM , SAE AMS 5840E (2010) - Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted ASTM A564-2019 - XM-13 ASTM A693 - PH13-8Mo |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.05 | ||
Si | - | - | ||
Mn | - | - | ||
Cr | 12.25 | 13.25 | ||
Ni | 7.50 | 8.50 | ||
Mo | 2.00 | 2.50 | ||
Co | - | - | ||
W | - | - | ||
Al | 0.90 | 1.35 | ||
Cu | - | - | ||
Ti | - | - | ||
Fe | - | - |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
295 (≥) | 913 (≥) | 14 | 43 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
972 (≥) | 583 (≥) | 42 | 43 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
247 | 963 | 592 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 564 S13800 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S13800 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S13800 | SAE | USA | Age-Hardening Stainless Steel Forgings |
S13800 | AISI | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
SA-564 S13800 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 S13800 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 S13800 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
A 564 XM-13 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 Type XM-13 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 XM-13 | SAE | USA | Age-Hardening Stainless Steel Forgings |
A 959 Type XM-13 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
F 899 Type XM-13 | SAE | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
SA-564 XM-13 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 Type XM-13 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 Type XM-13 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
PH 13-8Mo | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
PH13-8Mo, 1.4534, Alloy 13-8 | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
PH13-8Mo, 1.4534, Alloy 13-8 | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
Relevant products
PH13-8Mo, 1.4534, Alloy 13-8 Equivalent Grade Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
PH13-8Mo Forgings | Select | 0 | Select | Enquiry | ||
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry |