Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
SAE A 176 S44735 Enquiry | Print this page
SAE A 176 S44735 Details
SAE A 176 S44735 Standard Download
A 176 S44735 Datasheet
SAE A 176 S44735| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 176 S44735 | Ferrite | USA - SAE , A 176 - Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.03 | ||
| Mn | - | 1.00 | ||
| Si | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 28.00 | 30.00 | ||
| Ni | - | 1.00 | ||
| Mo | 3.60 | 4.20 | ||
| N | - | 0.045 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 118 (≥) | 863 (≥) | 41 | 31 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 718 (≥) | 668 (≥) | 44 | 21 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 197 | 673 | 615 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 0Cr13Al | GB | China | Heat-resisting steel sheets and plates |
| 0Cr17Ni7Al | GB | China | Heat-resisting steel sheets and plates |
| 0Cr15Ni7Mo2Al | GB | China | Stainless steel bars |
| 0Cr17Ni7Al | GB | China | Heat-resisting steel sheets and plates |
| A 240 S20161 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 276 S20161 | SAE | USA | Stainless Steel Bars and Shapes |
| A 314 S20161 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 479 S20161 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 580 S20161 | SAE | USA | Stainless Steel Wire |
| A 959 S20161 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| F 899 S20161 | SAE | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| S20161 | AISI | USA | Austenitic Chromium Manganese Nickel Silicon Stainless Steel |
| SA-240 S20161 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-276 S20161 | AMS | USA | Specification for Stainless Steel Bars and Shapes |
| SA-479 S20161 | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| B 688 N08366 | SAE | USA | Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| B 690 N08366 | SAE | USA | Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube |
| B 691 N08366 | SAE | USA | Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire |
| N08366 | AISI | USA | Austenitic Ni-Cr-Mo Stainless Steel |
| SB-688 N08366 | AMS | USA | Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
Relevant products
-
waspaloy round bar
-
TIAL5 TA6 Titanium alloy Round Bar
-
Nimonic 80A / NiCr20TiAl(2.4952) / UNS N07080/ BS 3HR1
-
Alloy 28 Bright Bar
-
N08028 Tube
-
Alloy 59 (2.4605) Tubes Pipe
-
X10CrAlSi-13(1.4724) Seamless tube
-
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar
-
X3CRNIMOAL13-8-2, 1.4534, PH13-8MO, UNS S13800
A 176 S44735 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry |