ASTM 20Cr Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 20Cr | ASTM | USA |
Chemical composition % of the ladle analysis of grade 20Cr
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| Max 0.30 | Max 1.50 | Max 1.00 | Max 0.040 | Max 0.040 | 18.0-21.0 | Max 2.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 652 (≥) | 894 (≥) | 24 | 33 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 232 (≥) | 927 (≥) | 41 | 33 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 263 | 546 | 945 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X20Cr13 | ASTM | USA | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes |
| 1.4021 | ASTM | USA | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes |
| X20CrMo13 | ASTM | USA | Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments |
| 1.4120 | ASTM | USA | Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments |
| X20Cr13 | ASTM | USA | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 1.4021 | ASTM | USA | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| X20Cr13 | ASTM | USA | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 1.4021 | ASTM | USA | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| 20CrMnVTiB4-10 | ASTM | USA | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| X20Cr13 | ASTM | USA | Stainless steels - Chemical composition |
| X20CrMoNiNbV11-1 | ASTM | USA | Wrought steels for use at elevated temperatures in engines |
| X12CrNiMoV12-3 | ASTM | USA | Wrought steels for use at elevated temperatures in engines |
| X220CrVMo12-2 | ASTM | USA | High alloyed CrVMo steel |
