AFNOR 20CrMnVTiB4-10 Enquiry | Print this page
AFNOR 20CrMnVTiB4-10 Details
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
AFNOR 20CrMnVTiB4-10 Standard Download
20CrMnVTiB4-10 Datasheet
AFNOR 20CrMnVTiB4-10| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 20CrMnVTiB4-10 | France - AFNOR , NF EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.17 | 0.23 | ||
| Si | - | 0.40 | ||
| Mn | 0.35 | 0.75 | ||
| P | - | 0.020 | ||
| S | - | 0.020 | ||
| Cr | 0.90 | 1.20 | ||
| Ni | - | 0.20 | ||
| Mo | 0.90 | 1.10 | ||
| Ti | 0.07 | 1.50 | ||
| V | 0.60 | 0.80 | ||
| Al | 0.015 | 0.080 | ||
| As | - | 0.20 | ||
| B | 0.001 | 0.010 | ||
| Cu | - | 0.20 | ||
| Sn | - | 0.20 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 722 (≥) | 383 (≥) | 42 | 21 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 424 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 267 (≥) | 619 (≥) | 24 | 22 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 925 | 377 | 823 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 20CrMnVTiB4-10 | AFNOR | France | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |