420S29 Enquiry | Print this page
| Category | Type | Steel grade | Country |
|---|---|---|---|
| Grades | Special Alloy | 420S29 | UK |
Chemical composition % of the ladle analysis of grade 420S29
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| 0.14-0.20 | Max 1.00 | Max 1.00 | Max 0.04 | Max 0.03 | 11.5-13.5 | Max 1.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 353 (≥) | 726 (≥) | 34 | 13 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 861 (≥) | 864 (≥) | 22 | 31 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 436 | 258 | 439 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 9Cr18MoV | UK | Stainless steel bars |
|
| 0Cr15Ni25Ti2MoA1VB | UK | Heat-resisting steel sheets and plates |
|
| 1Cr11MoV | UK | Steels of blade for steam turbine |
|
| 2Cr12MoVNbN | UK | Heat-resisting steel bars |
|
| 1Cr12WMoV | UK | Heat-resisting steel bars |
|
| 2Cr12NiMoWV | UK | Heat-resisting steel bars |
|
| 1Cr11Ni2W2MoV | UK | Heat-resisting steel bars |
|
| 2Cr11NiMoNbVN | UK | Steels of blade for steam turbine |
|
| S47450 | UK | Steels of blade for steam turbine |
|
| S47670 | UK | Steels of blade for steam turbine |
|
| X 19 CrMoNbVN 11-1 | UK | Stainless steels - Part 1: list of stainless steels |
|
| X 19 CrMoVNbN 11 1 | UK | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
|
| 1.4913 | UK | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
|
| 1.4923 | UK | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
|
| X 22 CrMoV 12-1 | UK | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
|
| Z21CDV12 | UK | Iron and steel. Stainless steel for high temperature application |
|
| A 167 S30415 | UK | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
|
| A 240 S30415 | UK | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
|
| A 249 S30415 | UK | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
|
| A 312 S30415 | UK | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
Relevant products
-
SKD-11 Cold working die steel
-
X165CrMoV12 Cold working die steel
-
T30402/X155CrVMo121 Die Steel Sheet
-
1.4980 Round Bar
-
DT413 / 4Cr5MoSiV1MOD
-
95CrV / 9CrV strip steel
-
K93600\1.3912\Invar36\4J36 rod coil strip wire
-
X19CrMoVNbN11-1 / 1.4913 Disc Forging
-
1.4923 / X22CrMoV12-1 Round Bar
-
1.4923(X22CrMoV12-1) Stainless Steel Sheets/Strip/Plate/Coil
-
ESR 40CDV2 Forging Bar
-
1.2343(H11/X38CrMoV5/Z38CDV5) ESR HOT-WORK STEEL
-
1.2344(H13/X40CrMoV5-1/Z40CDV5) ESR HOT-WORK STEEL
-
1.4923(X22CrMoV12-1) Hexagon socket head cap screws - DIN 912
-
1.2365(H10, X32CrMoV3-3, SKD7) Hot-Work Mould Steel
-
1.2714(L6, 55NiCrMoV7, SKT4,BH224-5) Hot-Work Mould Steel
-
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
-
50CrVD spring steel strip coil
-
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Forged Bars
-
28NiCrMoV8-5(1.6932) ESR Round Bar
420S29 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
| 1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| 1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List | Dia.182mm - Dia.510mm | Round Bar | Tons | 120 | Forged+Annealed+black | Enquiry |
| 1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
| 1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
| 1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
| 1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry |