X2CrNiMoV13-5-2, 1.4415 Martensitic stainless steel
EN X2CrNiMoV13-5-2, 1.4415 Enquiry | Print this page
EN X2CrNiMoV13-5-2, 1.4415 Details
EN X2CrNiMoV13-5-2, 1.4415 Standard Download
X2CrNiMoV13-5-2, 1.4415 Datasheet
EN X2CrNiMoV13-5-2, 1.4415Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | X2CrNiMoV13-5-2, 1.4415 | Martensite | European - EN , EN 10088-3: 2005 - Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10088-1: 2005 - Stainless steels. List of stainless steels |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.03 | ||
Si | - | 0.50 | ||
Mn | - | 0.50 | ||
P | - | 0.04 | ||
S | - | 0.015 | ||
Cr | 11.50 | 13.50 | ||
Ni | 4.50 | 6.50 | ||
Mo | 1.50 | 2.50 | ||
V | 0.10 | 0.50 | ||
Ti | - | 0.01 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
121 (≥) | 111 (≥) | 24 | 33 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
225 (≥) | 365 (≥) | 33 | 33 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
661 | 459 | 167 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
X2CrNiMoV13-5-2, 1.4415 | EN | European | Martensitic stainless steel |