SAE A 368 S30500 Enquiry | Print this page
SAE A 368 S30500 Details
Stainless Steel Wire Strand
SAE A 368 S30500 Standard Download
A 368 S30500 Datasheet
SAE A 368 S30500| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 368 S30500 | Austenite | USA - SAE , A 368 (2009) - Stainless Steel Wire Strand |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.12 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.045 | ||
| S | - | 0.030 | ||
| Cr | 17.0 | 19.0 | ||
| Ni | 10.5 | 13.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 161 (≥) | 257 (≥) | 32 | 34 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 399 (≥) | 328 (≥) | 32 | 14 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 342 | 593 | 771 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| T72305 | AISI | USA | Carbon tool steel |
| 305 | YB | USA | Stainless steel and heat resistant steel |
| A 167 Type 305 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 240 Type 305 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 TP305 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 276 305 | SAE | USA | Stainless Steel Bars and Shapes |
| A 313 Type 305 | SAE | USA | Stainless Steel Spring Wire |
| A 314 305 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 368 Type 305 | SAE | USA | Stainless Steel Wire Strand |
| A 473 305 | SAE | USA | Stainless Steel Forgings |
| A 478 Type 305 | SAE | USA | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 492 Type 305 | SAE | USA | Stainless Steel Rope Wire |
| A 493 Type 305 | SAE | USA | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| A 511 MT305 | SAE | USA | Seamless Stainless Steel Mechanical Tubing |
| A 554 MT 305 | SAE | USA | Welded Stainless Steel Mechanical Tubing |
| A 580 Type 305 | SAE | USA | Stainless Steel Wire |
| A 959 Type 305 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| F 593 305 | SAE | USA | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| F 594 305 | SAE | USA | Standard Specification for Stainless Steel Nuts |
| F 880 Class A1-50 305 | SAE | USA | Standard Specification for Stainless Steel Socket Set Screws (Metric) |