DIN 1.4926 Enquiry | Print this page
DIN 1.4926 Details
Steels for larger forgings for components in turbine and generator installations of 1.4926
DIN 1.4926 Standard Download
1.4926 Datasheet
DIN 1.4926| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 1.4926 | Martensite | Germany - DIN , SEW 555 - Steels for larger forgings for components in turbine and generator installations |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.20 | 0.26 | ||
| Si | - | 0.50 | ||
| Mn | 0.30 | 0.80 | ||
| P | - | 0.025 | ||
| S | - | 0.020 | ||
| Cr | 11.00 | 12.50 | ||
| Mo | 0.80 | 1.20 | ||
| Ni | 0.30 | 0.80 | ||
| V | 0.25 | 0.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 716 (≥) | 696 (≥) | 12 | 33 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 368 (≥) | 842 (≥) | 13 | 11 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 517 | 655 | 231 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 1.4926 | DIN | Germany | Steels for larger forgings for components in turbine and generator installations |
| X21CrMoV12-1 | DIN | Germany | Steels for larger forgings for components in turbine and generator installations |