CNS CNS 416 Enquiry | Print this page
CNS CNS 416 Details
Stainless steel wire rods
CNS CNS 416 Standard Download
CNS 416 Datasheet
CNS CNS 416| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | CNS 416 | Martensite | China - CNS , G3067 - Stainless steel bars G3076 - Stainless steel wires G3077 - Stainless steel wire rods |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Si | - | 1.00 | ||
| Mn | - | 1.25 | ||
| P | - | 0.060 | ||
| S | - | 0.15 | ||
| Ni | - | 0.60 | ||
| Cr | 12.00 | 14.00 | ||
| Mo | - | 0.60 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 965 (≥) | 594 (≥) | 42 | 34 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 842 (≥) | 416 (≥) | 34 | 43 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 441 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 642 | 425 | 567 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH4169 | GB | China | Classification and designation for superalloys and high temperature intermetallic materials |
| A 314 S41600 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 581 S41600 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41600 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S41600 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class C4-50 S41600 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class C4-70 S41600 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class C4-110 S41600 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| F836 Class C4-70 S41600 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S41600 | AISI | USA | Martensitic Free-Machining Stainless Steel |
| A 581 S41610 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41610 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| S41610 | AISI | USA | Martensitic Chromium Free Machining Stainless Steel |
| A 314 S41623 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 S41623 | SAE | USA | Stainless Steel Forgings |
| A 581 S41623 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S41623 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S41623 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class C4-50 S41623 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class C4-70 S41623 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |