GOST 25-20Л Enquiry | Print this page
GOST 25-20Л Details
Russia TY standard grades and chemical compositions of the high temperature alloy castings
GOST 25-20Л Standard Download
25-20Л Datasheet
GOST 25-20Л| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 25-20Л | Russia - GOST , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.18 | ||
| Cr | 22.00 | 26.00 | ||
| Al | - | - | ||
| Mo | - | - | ||
| Ti | - | - | ||
| Co | - | - | ||
| W | - | - | ||
| Ni | 17.00 | 21.00 | ||
| Nb | - | - | ||
| Fe | - | - | ||
| B | - | - | ||
| Ce | - | - | ||
| V | - | - | ||
| Zr | - | - | ||
| Mn | 0.70 | 1.50 | ||
| Si | 0.80 | 2.00 | ||
| S | - | 0.025 | ||
| P | - | 0.025 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 281 (≥) | 531 (≥) | 12 | 14 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 951 (≥) | 728 (≥) | 14 | 41 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 618 | 629 | 331 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 25-20Л | GOST | Russia | Russia TY standard grades and chemical compositions of the high temperature alloy castings |