GOST 18X13H3 Enquiry | Print this page
GOST 18X13H3 Details
Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition
GOST 18X13H3 Standard Download
18X13H3 Datasheet
GOST 18X13H3| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 18X13H3 | Russia - GOST , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | 0.22 | ||
| Si | - | 0.60 | ||
| Mn | - | 0.60 | ||
| P | - | 0.030 | ||
| S | - | 0.025 | ||
| Cr | 12.50 | 14.50 | ||
| Ni | 2.20 | 3.00 | ||
| Mo | 3.00 | 3.50 | ||
| Cu | 1.90 | 2.50 | ||
| N | 0.11 | 0.16 | ||
| Ce | - | 0.02 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 161 (≥) | 922 (≥) | 23 | 23 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 419 (≥) | 597 (≥) | 23 | 21 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 225 | 798 | 146 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 18X13H3 | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |