GOST 07X15H7ЮM2 Enquiry | Print this page
GOST 07X15H7ЮM2 Details
Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition
GOST 07X15H7ЮM2 Standard Download
07X15H7ЮM2 Datasheet
GOST 07X15H7ЮM2| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 07X15H7ЮM2 | Austenite | Russia - GOST , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.05 | 0.10 | ||
| Si | - | 0.70 | ||
| Mn | - | 0.70 | ||
| P | - | 0.030 | ||
| S | - | 0.020 | ||
| Cr | 14.20 | 15.80 | ||
| Ni | 7.00 | 8.50 | ||
| Mo | 1.60 | 2.40 | ||
| N | 0.08 | 0.18 | ||
| Ca | - | 0.10 | ||
| Mg | - | 0.10 | ||
| Ce | - | 0.10 | ||
| B | - | 0.0030 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 246 (≥) | 238 (≥) | 32 | 12 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 222 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 156 (≥) | 623 (≥) | 13 | 31 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 477 | 493 | 928 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 07X15H7ЮM2 | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |