AFNOR Z50CMNNb21-09-02Az Enquiry | Print this page
AFNOR Z50CMNNb21-09-02Az Details
Valve steels and alloys for internal combustion engines
AFNOR Z50CMNNb21-09-02Az Standard Download
Z50CMNNb21-09-02Az Datasheet
AFNOR Z50CMNNb21-09-02Az| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | Z50CMNNb21-09-02Az | France - AFNOR , NF A 35-579 - Valve steels and alloys for internal combustion engines |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.45 | 0.55 | ||
| Si | - | 0.45 | ||
| Mn | 8.00 | 10.00 | ||
| P | - | 0.040 | ||
| S | - | 0.030 | ||
| Cr | 20.00 | 22.00 | ||
| Ni | 3.50 | 5.00 | ||
| Mo | - | - | ||
| Nb/Ta | 1.80 | 2.50 | ||
| W | 0.80 | 1.50 | ||
| No | 0.40 | 0.60 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 677 (≥) | 651 (≥) | 12 | 44 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 563 (≥) | 726 (≥) | 34 | 24 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 582 | 278 | 153 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z50CMNNb21-09-02Az | AFNOR | France | Valve steels and alloys for internal combustion engines |