AFNOR 1.5662 Enquiry | Print this page
AFNOR 1.5662 Details
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
AFNOR 1.5662 Standard Download
1.5662 Datasheet
AFNOR 1.5662| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 1.5662 | France - AFNOR , NF EN 10028-4 - Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties NF EN 10222-3 - Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties NF EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.10 | ||
| Si | - | 0.35 | ||
| Mn | 0.30 | 0.80 | ||
| P | - | 0.020 | ||
| S | - | 0.010 | ||
| Cr | - | - | ||
| Ni | 8.50 | 10.00 | ||
| Mo | - | 0.10 | ||
| V | - | 0.05 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 817 (≥) | 777 (≥) | 14 | 31 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 771 (≥) | 484 (≥) | 11 | 43 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 512 | 678 | 638 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X8Ni9 | AFNOR | France | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| 1.5662 | AFNOR | France | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |