AFNOR 42CrMo4 Enquiry | Print this page
AFNOR 42CrMo4 Details
Steels for quenching and tempering for construction purposes - Technical delivery conditions
AFNOR 42CrMo4 Standard Download
42CrMo4 Datasheet
AFNOR 42CrMo4| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 42CrMo4 | France - AFNOR , NF A 35-590 - Tool steels NF EN 10083-1 - Steels for quenching and tempering - Part 1: General technical delivery conditions NF EN 10083-3 - Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels NF EN 10132-3 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering NF EN 10250-3 - Open die steel forgings for general engineering purposes - Part 3: Alloy special steels NF EN 10263-4 - Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering NF EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties NF EN 10297-1 - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes NF EN 10305-1 - Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes NF EN 10343 - Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.38 | 0.45 | ||
| Si | - | 0.40 | ||
| Mn | 0.60 | 0.90 | ||
| P | - | 0.035 | ||
| S | - | 0.035 | ||
| Cr | 0.90 | 1.20 | ||
| Ni | - | - | ||
| Mo | 0.15 | 0.30 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 396 (≥) | 816 (≥) | 34 | 34 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 443 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 296 (≥) | 776 (≥) | 33 | 44 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 321 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 837 | 622 | 686 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 42CrMo4 | AFNOR | France | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| 1.7225 | AFNOR | France | Steels for quenching and tempering for construction purposes - Technical delivery conditions |