AFNOR Z4CND17-11-02FF Enquiry | Print this page
AFNOR Z4CND17-11-02FF Details
Iron and steel. Stainless steel wire rods for cold forming
AFNOR Z4CND17-11-02FF Standard Download
Z4CND17-11-02FF Datasheet
AFNOR Z4CND17-11-02FF| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | Z4CND17-11-02FF | France - AFNOR , NF A 35-577 - Iron and steel. Stainless steel wire rods for cold forming |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.020 | 0.050 | ||
| Si | 0.50 | 1.00 | ||
| Mn | 1.00 | 1.50 | ||
| P | - | 0.040 | ||
| S | - | 0.010 | ||
| Cr | 16.50 | 17.50 | ||
| Mo | 2.00 | 2.50 | ||
| Ni | 10.50 | 11.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 923 (≥) | 799 (≥) | 33 | 31 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 755 (≥) | 614 (≥) | 12 | 13 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 376 | 996 | 362 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z4CND17-11-02FF | AFNOR | France | Iron and steel. Stainless steel wire rods for cold forming |