AFNOR Z11CN18-08CI Enquiry | Print this page
AFNOR Z11CN18-08CI Details
Iron and steel. Cutlery stainless steel
AFNOR Z11CN18-08CI Standard Download
Z11CN18-08CI Datasheet
AFNOR Z11CN18-08CI| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | Z11CN18-08CI | France - AFNOR , NF A 35-595 - Iron and steel. Cutlery stainless steel |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.09 | 0.12 | ||
| Si | - | 0.75 | ||
| Mn | 0.75 | 1.20 | ||
| P | - | 0.040 | ||
| S | - | 0.015 | ||
| Cr | 16.50 | 18.50 | ||
| Mo | - | - | ||
| Ni | 7.00 | 8.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 384 (≥) | 283 (≥) | 43 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 549 (≥) | 148 (≥) | 32 | 22 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 211 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 474 | 962 | 457 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z11CN18-08 | AFNOR | France | Stainless steels for general purposes. Plates, wide strips and strips |
| Z11CN18-08CI | AFNOR | France | Iron and steel. Cutlery stainless steel |