B.S. HR205 Enquiry | Print this page
B.S. HR205 Details
Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31)
B.S. HR205 Standard Download
HR205 Datasheet
B.S. HR205| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | HR205 | UK - B.S. , BS HR 205 (1989) - Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) BS 2HR 205 (2009) - Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31) |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.16 | ||
| Si | - | 0.50 | ||
| Mn | - | 2.00 | ||
| P | - | - | ||
| S | - | 0.020 | ||
| Cr | - | - | ||
| Ni | 63.00 | - | ||
| Mo | - | - | ||
| Co | - | 2.00 | ||
| Ti | - | - | ||
| Fe | - | 2.50 | ||
| Al | - | 0.50 | ||
| Cu | 28.00 | 34.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 758 (≥) | 689 (≥) | 24 | 11 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 115 (≥) | 757 (≥) | 13 | 12 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 121 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 575 | 626 | 484 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HR205 | B.S. | UK | Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31) |