B.S. 352S54 Enquiry | Print this page
B.S. 352S54 Details
Specification for wrought steels for mechanical and allied engineering purposes. Valve steels
B.S. 352S54 Standard Download
352S54 Datasheet
B.S. 352S54| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 352S54 | UK - B.S. , BS 970-4 - Specification for wrought steels for mechanical and allied engineering purposes. Valve steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.48 | 0.58 | ||
| Si | - | 0.45 | ||
| Mn | 8.00 | 10.00 | ||
| P | - | 0.040 | ||
| S | 0.035 | 0.080 | ||
| Cr | 20.00 | 22.00 | ||
| Ni | 3.25 | 4.50 | ||
| Mo | - | - | ||
| N | 0.38 | 0.50 | ||
| C+N | 0.90 | - | ||
| Nb | 2.00 | 3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 948 (≥) | 435 (≥) | 23 | 22 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 644 (≥) | 986 (≥) | 34 | 34 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 778 | 648 | 466 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 352S54 | B.S. | UK | Specification for wrought steels for mechanical and allied engineering purposes. Valve steels |