B.S. NA17 Enquiry | Print this page
B.S. NA17 Details
Specification for nickel and nickel alloys: bar
B.S. NA17 Standard Download
NA17 Datasheet
B.S. NA17| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | NA17 | UK - B.S. , BS 3072 - Specification for nickel and nickel alloys: sheet and plate BS 3073 - Specification for nickel and nickel alloys: strip BS 3074 - Specification for nickel and nickel alloys: seamless tube BS 3075 - Specification for nickel and nickel alloys: wire BS 3076 - Specification for nickel and nickel alloys: bar |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.10 | ||
| Si | 1.90 | 2.60 | ||
| Mn | 0.80 | 1.50 | ||
| P | - | - | ||
| S | - | 0.030 | ||
| Cr | 17.00 | 19.00 | ||
| Ni | 34.50 | 41.00 | ||
| Mo | - | - | ||
| Al | - | - | ||
| Cu | - | 0.50 | ||
| Ti | - | 0.20 | ||
| Fe | - | remaining |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 828 (≥) | 721 (≥) | 12 | 34 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 384 (≥) | 381 (≥) | 11 | 12 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 134 | 317 | 467 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| NA17 | B.S. | UK | Specification for nickel and nickel alloys: bar |
| Z9CNA17-07 | AFNOR | France | Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod |