B.S. NA3 Enquiry | Print this page
B.S. NA3 Details
Specification for nickel-copper alloy castings
B.S. NA3 Standard Download
NA3 Datasheet
B.S. NA3| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | NA3 | UK - B.S. , BS 3071 - Specification for nickel-copper alloy castings |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Si | 3.50 | 4.50 | ||
| Mn | - | 1.50 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | - | - | ||
| Mo | - | - | ||
| Ni | - | remaining | ||
| Cu | 28.00 | 34.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 387 (≥) | 423 (≥) | 21 | 24 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 882 (≥) | 874 (≥) | 42 | 32 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 413 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 393 | 761 | 418 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| NA3 | B.S. | UK | Specification for nickel-copper alloy castings |
| NA32 | B.S. | UK | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA34 | B.S. | UK | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA35 | B.S. | UK | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA36 | B.S. | UK | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA37 | B.S. | UK | Filler rods and wires for gas-shielded arc welding; Nickel and nickel alloys |
| NA38 | B.S. | UK | Filler rods and wires for gas-shielded arc welding; Nickel and nickel alloys |
| NA39 | B.S. | UK | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |