UNS 303 Cu Enquiry | Print this page
UNS 303 Cu Details
Chemical compositions of SAE wrought stainless steels
UNS 303 Cu Standard Download
303 Cu Datasheet
UNS 303 Cu| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 303 Cu | Austenite | USA - UNS , SAE J 405 (1998) - Chemical compositions of SAE wrought stainless steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.15 | ||
| S | 0.10 | - | ||
| Cr | 17.0 | 19.0 | ||
| Ni | 6.00 | 10.0 | ||
| Cu | 2.50 | 4.00 | ||
| Se | 0.10 | - |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 786 (≥) | 196 (≥) | 14 | 14 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 516 (≥) | 727 (≥) | 13 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 636 | 423 | 835 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 303 Cu | UNS | USA | Chemical compositions of SAE wrought stainless steels |
| SUS 303Cu | FED | Japan | Austenitic stainless steel; B (bars) can be suffixed to the symbol of the grade; Round bars, square bars, hexagonal bars and flat bars, hereafter generically reffered to as "bars". |
| SUS303Cu | AMS | USA | Specification for stainless steel bars |
| S30330 | AISI | USA | Austenitic Chromium Nickel Copper Free-Machining Stainless Steel |
| SUS 303 Cu | JIS | Japan | Stainless steel bars |
| SUS 303 Cu | JIS | Japan | Stainless steel wire rods |
| SUS 303 Cu | JIS | Japan | Stainless steel wires |
| SUS 303 Cu | JIS | Japan | Cold finished stainless steel bars |