JIS SUS XM27 Enquiry | Print this page
JIS SUS XM27 Details
Cold-rolled stainless steel plate, sheet and strip
JIS SUS XM27 Standard Download
SUS XM27 Datasheet
JIS SUS XM27Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SUS XM27 | Ferrite | Japan - JIS , G 4305 (2012) - Cold-rolled stainless steel plate, sheet and strip |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.10 | ||
Si | - | 0.40 | ||
Mn | - | 0.40 | ||
P | - | 0.03 | ||
S | - | 0.02 | ||
Cr | 25.00 | 27.00 | ||
Ni | - | 0.50 | ||
Mo | 0.75 | 1.50 | ||
N | - | 0.015 | ||
Cu | - | 0.20 | ||
NI+Cu | - | 0.50 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
439 (≥) | 524 (≥) | 42 | 32 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
179 (≥) | 726 (≥) | 21 | 43 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
921 | 313 | 932 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
SUS XM27 | JIS | Japan | Stainless steel bars |
SUS XM27 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
SUS XM27 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
SUS XM27 TB | JIS | Japan | Stainless steel boiler and heat exchanger tubes |