JIS SUS XM 15J1 TB Enquiry | Print this page
JIS SUS XM 15J1 TB Details
Stainless steel boiler and heat exchanger tubes
JIS SUS XM 15J1 TB Standard Download
SUS XM 15J1 TB Datasheet
JIS SUS XM 15J1 TBCategory | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SUS XM 15J1 TB | Austenite | Japan - JIS , G 3463 (2012) - Stainless steel boiler and heat exchanger tubes |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.08 | ||
Si | 3.00 | 5.00 | ||
Mn | - | 2.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 15.00 | 20.00 | ||
Ni | 11.50 | 15.50 | ||
Mo | - | - | ||
N | - | - |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
537 (≥) | 962 (≥) | 24 | 33 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
937 (≥) | 557 (≥) | 43 | 44 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
563 | 826 | 718 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
SUS XM 15J1 TB | JIS | Japan | Stainless steel boiler and heat exchanger tubes |
SUS XM15 J1 | JIS | Japan | Stainless steel bars |
SUS XM15 J1 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
SUS XM15 J1 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
SUS XM15 J1 | JIS | Japan | Stainless steel wires |
SUS XM15 J1 | JIS | Japan | Heat-resisting steel bars and wire rods |
SUS XM15 J1 | JIS | Japan | Heat-resisting steel plate, sheet and strip |