UNS PYROMET CTX-1 Enquiry | Print this page
UNS PYROMET CTX-1 Details
Wrought Nickel and Nickel-Related Alloys
UNS PYROMET CTX-1 Standard Download
PYROMET CTX-1 Datasheet
UNS PYROMET CTX-1| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | PYROMET CTX-1 | Precipitation-Hardening | USA - UNS , SAE J 470 (1976) - Wrought Nickel and Nickel-Related Alloys |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.03 | ||
| Si | - | 0.20 | ||
| Mn | - | 0.20 | ||
| Cr | - | 0.20 | ||
| Ni | - | 37.70 | ||
| Mo | - | 0.20 | ||
| Co | - | 16.00 | ||
| W | - | - | ||
| Al | - | 1.00 | ||
| Cu | - | 0.50 | ||
| Ti | - | 1.75 | ||
| Fe | - | remaining | ||
| B | - | 0.0075 | ||
| P | - | 0.015 | ||
| S | - | 0.015 | ||
| Nb/Ta | - | 3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 976 (≥) | 911 (≥) | 22 | 43 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 881 (≥) | 617 (≥) | 41 | 21 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 428 | 458 | 838 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| PYROMET CTX-1 | UNS | USA | Wrought Nickel and Nickel-Related Alloys |