UNS AF 1410 Enquiry | Print this page
UNS AF 1410 Details
Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging
UNS AF 1410 Standard Download
AF 1410 Datasheet
UNS AF 1410| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | AF 1410 | Precipitation-Hardening | USA - UNS , SAE AMS 6533C (2002) - Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.13 | 0.17 | ||
| Si | - | 0.10 | ||
| Mn | - | 0.10 | ||
| P | - | 0.008 | ||
| S | - | 0.005 | ||
| Ni | 9.50 | 10.50 | ||
| Cr | 1.80 | 2.20 | ||
| Al | - | 0.015 | ||
| Cu | - | - | ||
| Ti | - | 0.015 | ||
| Fe | - | - | ||
| N | - | 0.0015 | ||
| Mo | 0.90 | 1.10 | ||
| W | - | - | ||
| O | - | 0.0015 | ||
| Co | 13.50 | 14.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 584 (≥) | 628 (≥) | 34 | 13 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 896 (≥) | 125 (≥) | 13 | 32 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 967 | 871 | 279 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| AF 1410 | ASTM | USA | Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged |
| AF 1410 | ASTM | USA | Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged |
| AF 1410 | ASTM | USA | Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging |
| AF 1410 | UNS | USA | Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged |
| AF 1410 | UNS | USA | Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged |
| AF 1410 | UNS | USA | Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging |