SAE A 506 G15216 Enquiry | Print this page
SAE A 506 G15216 Details
Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
SAE A 506 G15216 Standard Download
A 506 G15216 Datasheet
SAE A 506 G15216| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 506 G15216 | Precipitation-Hardening | USA - SAE , A 506 (2012) - Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 1.00 | ||
| Mn | 7.50 | 9.00 | ||
| P | - | - | ||
| S | - | - | ||
| Ni | 5.00 | 7.00 | ||
| Cr | 17.50 | 22.00 | ||
| Al | - | - | ||
| Cu | - | - | ||
| Ti | - | - | ||
| Fe | - | - | ||
| N | 0.25 | 0.50 | ||
| Mo | 2.00 | 3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 843 (≥) | 359 (≥) | 44 | 23 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 693 (≥) | 893 (≥) | 41 | 23 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 358 | 952 | 276 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 216 | YB | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-479 Type XM-17 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 240 Type XM-17 | UNS | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 479 XM-17 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 492 Type XM-17 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 959 Type XM-17 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| S21600 | AISI | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| 216L | YB | USA | Chemical compositions of SAE wrought stainless steels |
| S21603 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
| A 240 S21600 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 492 S21600 | SAE | USA | Stainless Steel Rope Wire |
| S21600 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
| SA-240 S21600 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 240 S21603 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 492 S21603 | SAE | USA | Stainless Steel Rope Wire |
| S21603 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
| SA-240 S21603 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 216 Grade WCA | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| A 216 Grade WCB | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| A 216 Grade WCC | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
