SAE A 791 Grade 25-4-4 Enquiry | Print this page
SAE A 791 Grade 25-4-4 Details
Aluminum-Zinc Alloy-Coated Wire Strand
SAE A 791 Grade 25-4-4 Standard Download
A 791 Grade 25-4-4 Datasheet
SAE A 791 Grade 25-4-4| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 791 Grade 25-4-4 | Precipitation-Hardening | USA - SAE , A 791/A 791M - Aluminum-Zinc Alloy-Coated Wire Strand |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.025 | ||
| Si | - | 0.75 | ||
| Mn | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.04 | ||
| Ni | 3.35 | 4.50 | ||
| Cr | 24.50 | 26.00 | ||
| Al | - | - | ||
| Cu | - | 0.50 | ||
| Ti | - | - | ||
| Fe | - | - | ||
| N | - | 0.035 | ||
| Mo | 3.50 | 4.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 387 (≥) | 155 (≥) | 44 | 34 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 867 (≥) | 977 (≥) | 22 | 11 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 683 | 199 | 574 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 176 S44635 | SAE | USA | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| A 240 S44635 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 268 S44635 | SAE | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| S44635 | AISI | USA | Ferritic Chromium Molybdenum Nickel Stainless Steel (25-4-4) |
| SA-240 S44635 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-268 S44635 | AMS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| A 268 25-4-4 | SAE | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| A 791 Grade 25-4-4 | SAE | USA | Aluminum-Zinc Alloy-Coated Wire Strand |
| A 803 Grade 25-4-4 | SAE | USA | Welded Ferritic Stainless Steel Feedwater Heater Tubes |
| A 959 Type 25-4-4 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| K42544 | AISI | USA | Alloy Steel |
| SA-240 Type 25-4-4 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-268 25-4-4 | AMS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| SA-803 25-4-4 | AMS | USA | Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |