SAE A 376 16-8-2H Enquiry | Print this page
SAE A 376 16-8-2H Details
Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
SAE A 376 16-8-2H Standard Download
A 376 16-8-2H Datasheet
SAE A 376 16-8-2H| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | A 376 16-8-2H | USA - SAE , A 376/A 376M (2013) - Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.045 | 0.10 | ||
| Si | - | 0.75 | ||
| Mn | - | 2.00 | ||
| Cr | 14.5 | 16.5 | ||
| Ni | 7.5 | 9.5 | ||
| Mo | 1.50 | 2.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 159 (≥) | 315 (≥) | 44 | 11 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 744 (≥) | 387 (≥) | 44 | 22 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 441 | 859 | 874 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 376 16-8-2H | SAE | USA | Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
| A 430 FP 16-8-2H | SAE | USA | Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service |
| A 959 Type 16-8-2H | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| SA-376 16-8-2H | AMS | USA | Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
| SA-430 Grade FP16-8-2H | AMS | USA | Austentic Steel Forged and Bored Pipe for High-Temperature Service |