SAE A 249 TPXM-29 Enquiry | Print this page
SAE A 249 TPXM-29 Details
A 249 TPXM-29
SAE A 249 TPXM-29 Standard Download
A 249 TPXM-29 Datasheet
SAE A 249 TPXM-29| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 249 TPXM-29 | Austenite | USA - SAE , A 249/A 249M (2010) - Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 1.00 | ||
| Mn | 11.5 | 14.5 | ||
| P | - | 0.06 | ||
| S | - | 0.03 | ||
| Cr | 17.0 | 19.0 | ||
| Ni | 2.25 | 3.75 | ||
| N | 0.20 | 0.40 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 743 (≥) | 129 (≥) | 44 | 43 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 422 (≥) | 936 (≥) | 33 | 23 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 541 | 699 | 417 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 Type XM-29 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 TPXM-29 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 TPXM-29 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 276 XM-29 | SAE | USA | Stainless Steel Bars and Shapes |
| A 312 TPXM-29 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 314 XM-29 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 358 XM-29 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| A 412 Type XM-29 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel-Manganese Steel Plate, Sheet, and Strip |
| A 479 XM-29 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 580 Type XM-29 | SAE | USA | Stainless Steel Wire |
| A 688 Grade TP XM-29 | SAE | USA | Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A 813 Grade TP XM-29 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A 814 Grade TP XM-29 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 943 TPXM-29 | SAE | USA | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
| A 955 XM-29 Grade 280 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
| A 955 XM-29 Grade 40 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
| A 955 XM-29 Grade 420 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
| A 955 XM-29 Grade 520 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
| A 955 XM-29 Grade 60 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
| A 955 XM-29 Grade 75 | SAE | USA | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |