Get Appoinment
Location » Home » Grades > Stainless Steels > A 479 S30600

SAE A 479 S30600 Enquiry | Print this page

SAE A 479 S30600 Details

Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

SAE A 479 S30600 Standard Download

A 479 S30600 Datasheet
SAE A 479 S30600

Tags

A 479 S30600 Application:Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Category Type Grade Microstructure Designations
Grades Stainless Steels A 479 S30600 Austenite USA - SAE , A 479/A 479M (2013) - Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Chemical composition(mass fraction)(wt.%)
Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.018
Mn - 2.00
Si 3.70 4.30
P - 0.02
S - 0.02
Cr 17.00 18.50
Ni 14.00 15.50
Mo - 0.20
Mechanical properties of grade A 479 S30600
Proof strength
Rp0.2 (MPa)		 Tensile strength
Rm (MPa)		 Impact energy
KV (J)		 Elongation at fracture
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
479 (≥) 328 (≥) 44 11 34 Solution and Aging, Annealing, Ausaging, Q+T,etc 432
Physical properties of grade A 479 S30600
Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm		 Modulus of elasticity
kN/mm2		 Expansion rate
868 (≥) 594 (≥) 11 31 43 Solution and Aging, Annealing, Ausaging, Q+T,etc 342
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2
763 875 931
A 479 S30600 Range of products
Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
A 167 S30600 SAE USA
Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A 240 S30600 SAE USA
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A 269 S30600 SAE USA
Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A 312 S30600 SAE USA
Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A 358 S30600 SAE USA
Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A 479 S30600 SAE USA
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A 943 S30600 SAE USA
Spray-Formed Seamless Austenitic Stainless Steel Pipes
A 959 S30600 SAE USA
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A 965 S30600 SAE USA
Steel Forgings, Austenitic, for Pressure and High Temperature Parts
S30600 AISI USA
Austenitic Chromium Nickel Stainless Steel
SA-240 S30600 AMS USA
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA-312 S30600 AMS USA
Specification for Seamless and Welded Austenitic Stainless Steel Pipes
SA-358 S30600 AMS USA
Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
SA-479 S30600 AMS USA
Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
SA-965 S30600 AMS USA
Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A 213 N08925 SAE USA
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A 240 N08925 SAE USA
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A 276 N08925 SAE USA
Stainless Steel Bars and Shapes
A 312 N08925 SAE USA
Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A 479 N08925 SAE USA
Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Relevant products

A 479 S30600 Equivalent Grade Stock

Steel grade Dimension Shape Unit Quantity Delivery state Query
IncoloyA-286 / GH 2132 Stock Φ8-65mm*L Round Bar Kgs 489 Hot-Rolled+Annealed+black Enquiry
Incoloy800 round bar Φ115*1400 Round Bar Kgs 169 Hot-Rolled+Annealed+black Enquiry
1.4882 strip/sheet/plate stock 3.5x200x1000-2000mm Coil or Strip Kgs 200 Cold-Rolled+Annealed Enquiry
1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) Select 0 Select Enquiry
1.2714 Stock list 2020-06-15 Select 0 Select Enquiry
1.2714 QT Bar Stock List 2020-06-15 Select 0 Select Enquiry
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock Select 0 Select Enquiry
Cr8 flat bar 12*355*L Flat or Square bar Kgs 3965 Forged+Annealed+black Enquiry
Cr12MoV 12-160(T)*310-610(W)*L Plate or Sheet Tons 12.38 Hot-Rolled+Annealed+black Enquiry
1.2601 12-160(T)*310-610(W)*L Plate or Sheet Tons 11.22 Hot-Rolled+Annealed+black Enquiry
X22CrMoV12-1 / 1.4923 Φ17mm Round Bar Kgs 300 Hot-Rolled+Annealed+black Enquiry
X22CrMoV12-1 / 1.4923 Φ30mm Round Bar Kgs 300 Hot-Rolled+Annealed+black Enquiry
T45Cr5Si3 Round Bar Dia.40mm Round Bar Kgs 500 Hot-Rolled+Annealed+black Enquiry
1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List Dia.182mm - Dia.510mm Round Bar Tons 120 Forged+Annealed+black Enquiry