SAE A 249 S33228 Enquiry | Print this page
SAE A 249 S33228 Details
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
SAE A 249 S33228 Standard Download
A 249 S33228 Datasheet
SAE A 249 S33228Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 249 S33228 | Austenite | USA - SAE , A 249/A 249M (2010) - Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.04 | 0.08 | ||
Mn | - | 1.00 | ||
Si | - | 0.30 | ||
P | - | 0.02 | ||
S | - | 0.015 | ||
Cr | 26.0 | 28.0 | ||
Ni | 31.0 | 33.0 | ||
Ce | 0.05 | 0.10 | ||
Nb | 0.10 | 1.00 | ||
Al | - | 0.025 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
776 (≥) | 131 (≥) | 43 | 24 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
719 (≥) | 977 (≥) | 31 | 33 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
828 | 781 | 564 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 167 S33228 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A 213 S33228 | SAE | USA | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
A 240 S33228 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S33228 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 312 S33228 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A 314 S33228 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 403 CRS33228 | SAE | USA | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
A 403 WP S33228 | SAE | USA | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
A 479 S33228 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 959 S33228 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
S33228 | AISI | USA | Austenitic Nickel Chromium Heat Resisting Stainless Steel (Nicrofer 3228 NbCe) |
SA-213 S33228 | AMS | USA | Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
SA-240 S33228 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-312 S33228 | AMS | USA | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
SA-479 S33228 | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |