GB 4Cr14Ni14W2Mo Enquiry | Print this page
GB 4Cr14Ni14W2Mo Details
4Cr14Ni14W2Mo
GB 4Cr14Ni14W2Mo Standard Download
4Cr14Ni14W2Mo Datasheet
GB 4Cr14Ni14W2Mo| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 4Cr14Ni14W2Mo | Austenite | China - GB , GB/T 1221 (1992) - Heat-resisting steel bars GB/T 12773 (1991) - Valve steel bars for internal combustion engines - Technical requirements GB/T 4356 (1984) - Stainless steel wire rods |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.40 | 0.50 | ||
| Si | - | 0.80 | ||
| Mn | - | 0.70 | ||
| P | - | 0.35 | ||
| S | - | 0.03 | ||
| Ni | 13.00 | 15.00 | ||
| Cr | 13.00 | 15.00 | ||
| Mo | 0.25 | 0.40 | ||
| W | 2.00 | 2.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 959 (≥) | 956 (≥) | 34 | 23 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 181 (≥) | 742 (≥) | 43 | 44 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 395 | 564 | 356 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 4Cr14Ni14W2Mo | GB | China | Heat-resisting steel bars |