GB 9Cr18 Enquiry | Print this page
GB 9Cr18 Details
9Cr18
GB 9Cr18 Standard Download
9Cr18 Datasheet
GB 9Cr18| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 9Cr18 | Martensite | China - GB , GB/T 1220 (1992) - Stainless steel bars GB/T 3086 (2008) - Specification for high carbon chromium stainless bearing steels GB/T 4240 (1993) - Stainless steel wires GB/T 4356 (2002) - Stainless steel wire rods |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.90 | 1.00 | ||
| Si | - | 0.80 | ||
| Mn | - | 0.80 | ||
| P | - | 0.035 | ||
| S | - | 0.030 | ||
| Ni | - | 0.60 | ||
| Cr | 17.00 | 19.00 | ||
| Mo | - | 0.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 715 (≥) | 841 (≥) | 43 | 31 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 761 (≥) | 415 (≥) | 12 | 33 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 552 | 795 | 119 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 9Cr18 | GB | China | Stainless steel bars |
| 9Cr18Mo | GB | China | Stainless steel bars |
| 9Cr18MoV | GB | China | Stainless steel bars |
