AFNOR 16NCD17 Air 9160/C Enquiry | Print this page
AFNOR 16NCD17 Air 9160/C Details
16NCD17 Air 9160C wrought steels used in aeronautical constructions
AFNOR 16NCD17 Air 9160/C Standard Download
16NCD17 Air 9160/C Datasheet
AFNOR 16NCD17 Air 9160/CCategory | Type | Grade | Designations |
---|---|---|---|
Grades | Aviation and Aero Steel | 16NCD17 Air 9160/C | France - AFNOR , AIR 9160 C - wrought steels used in aeronautical constructions |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.14 | 0.18 | ||
Si | 0.10 | 0.30 | ||
Mn | 0.35 | 0.45 | ||
P | - | 0.025 | ||
S | - | 0.020 | ||
Cr | 1.00 | 1.30 | ||
Ni | 4.00 | 4.50 | ||
Mo | 0.15 | 0.35 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
397 (≥) | 831 (≥) | 23 | 34 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
546 (≥) | 215 (≥) | 34 | 24 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
883 | 629 | 579 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
16NCD17 Air 9160/C | AFNOR | France | wrought steels used in aeronautical constructions |