AFNOR Z12CNDV12 Air 9160/C Enquiry | Print this page
AFNOR Z12CNDV12 Air 9160/C Details
Z12CNDV12 Air 9160C wrought steels used in aeronautical constructions
AFNOR Z12CNDV12 Air 9160/C Standard Download
Z12CNDV12 Air 9160/C Datasheet
AFNOR Z12CNDV12 Air 9160/C| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Aviation and Aero Steel | Z12CNDV12 Air 9160/C | France - AFNOR , AIR 9160 C - wrought steels used in aeronautical constructions |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | 0.15 | ||
| Si | - | 0.35 | ||
| Mn | 0.50 | 0.90 | ||
| P | - | 0.035 | ||
| S | - | 0.025 | ||
| Cr | 11.00 | 12.50 | ||
| Ni | 2.00 | 3.00 | ||
| Mo | 1.50 | 2.00 | ||
| V | 0.25 | 0.40 | ||
| N | 0.02 | 0.04 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 678 (≥) | 192 (≥) | 24 | 12 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 324 (≥) | 887 (≥) | 12 | 34 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 579 | 756 | 141 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z12CNDV12-03 | AFNOR | France | Iron and steel. Stainless steel for high temperature application |
| Z12CNDV12-03 | AFNOR | France | Iron and steel. Stainless steel for high temperature application |
| Z12CNDV12-03 | AFNOR | France | Iron and steel. Stainless steel for high temperature application |
| Z12CNDV12 Air 9160/C | AFNOR | France | wrought steels used in aeronautical constructions |
| X12CrNiMoV12-3, 1.4938 | EN | European | X12CrNiMoV12-3, 1.4938 |
| X12CrNiMoV12-3 | AFNOR | France | Creep resisting steels, nickel and cobalt alloys |
| 1.4938 | AFNOR | France | Creep resisting steels, nickel and cobalt alloys |
