DIN 90MnCrV8 Enquiry | Print this page
DIN 90MnCrV8 Details
Tool steels (ISO 4957:1999)
DIN 90MnCrV8 Standard Download
90MnCrV8 Datasheet
DIN 90MnCrV8| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Tool Die Steels | 90MnCrV8 | Germany - DIN , DIN 17350 (1980) - Tool Steels; Technical Conditions of Delivery DIN EN ISO 4957 (1999) - Tool steels (ISO 4957:1999) |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.85 | 0.95 | ||
| Si | 0.10 | 0.40 | ||
| Mn | 1.90 | 2.10 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | 0.20 | 0.50 | ||
| Mo | - | - | ||
| V | 0.05 | 0.15 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 774 (≥) | 712 (≥) | 22 | 14 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 328 (≥) | 565 (≥) | 41 | 34 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 397 | 983 | 946 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 90MnCrV8 | DIN | Germany | Tool steels (ISO 4957:1999) |