ASTM D4 Enquiry | Print this page
ASTM D4 Details
Cold-Work Tool Steel
ASTM D4 Standard Download
D4 Datasheet
ASTM D4| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Tool Die Steels | D4 | USA - ASTM , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 2.05 | 2.40 | ||
| Si | 0.10 | 0.60 | ||
| Mn | 0.10 | 0.60 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | 11.00 | 13.00 | ||
| Mo | 0.70 | 1.20 | ||
| V | 0.15 | 1.00 | ||
| W | - | - | ||
| Ni＋Cu | - | 0.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 223 (≥) | 537 (≥) | 14 | 13 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 321 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 526 (≥) | 621 (≥) | 23 | 24 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 211 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 489 | 777 | 469 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| D4 | ASTM | USA | Cold-Work Tool Steel |
| 35CD4 Air 9160C | AFNOR | France | SPECIAL STEEL GRADES APPROVED FOR USE IN THE AEROSPACE INDUSTRY. |
| 25CD4S Air 9160/C | AFNOR | France | wrought steels used in aeronautical constructions |
| 35CD4 Air 9160/C | AFNOR | France | wrought steels used in aeronautical constructions |
