UNS MONEL ALLOY 400 Enquiry | Print this page
UNS MONEL ALLOY 400 Details
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media, including sea water, hydrofluoric acid,sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts,fittings, fasteners and heat exchangers
UNS MONEL ALLOY 400 Standard Download
MONEL ALLOY 400 Datasheet
UNS MONEL ALLOY 400| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Superalloys | MONEL ALLOY 400 | USA - UNS , UNS N04400 - BS 3072 – 3076 (NA13) - SAE AMS 4544, 4574, 4675, 4730, 4731, 7233 - DIN 17743, 17750 – 17754 - ASTM B 127, B 163 – B 165,B 366, B 564, B 725, B 730,B 751, B 775, B 829 - ASME SB-127, SB-163 – SB-165,SB-366, SB-564, SB-725,SB-730, SB-751, SB-775,SB-829 - |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| Ni | 63.00 | - | ||
| Mn | - | 2.00 | ||
| S | - | 0.50 | ||
| Cu | 28.00 | 34.00 | ||
| C | - | 0.30 | ||
| Fe | - | 2.50 | ||
| Si | - | 0.024 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 737 (≥) | 813 (≥) | 23 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 234 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 352 (≥) | 332 (≥) | 41 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 412 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 356 | 669 | 559 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| MONEL ALLOY 400 | UNS | USA | Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire. |
