UNS ALLOY 301 Enquiry | Print this page
UNS ALLOY 301 Details
An age-hardened alloy that combines the excellent corrosion resistance characteristics of Nickel 200 with the added advantages of greater strength and hardness. The alloy is used for springs requiring high electrical conductivity, parts of equipment requiring good thermal conductivity and magnetostrictive units, which are operated under stress conditions in which the fatigue strength of Nickel 200 is inadequate.
UNS ALLOY 301 Standard Download
ALLOY 301 Datasheet
UNS ALLOY 301| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Superalloys | ALLOY 301 | USA - UNS , UNS N03301 - Round bar and wire. |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| Ni | 93.0 | - | ||
| Cu | - | 0.25 | ||
| Si | - | 1.00 | ||
| Mn | - | 0.50 | ||
| Fe | - | 0.60 | ||
| S | - | 0.01 | ||
| Ti | 0.25 | 1.00 | ||
| C | - | 0.30 | ||
| Al | 4.00 | 4.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 474 (≥) | 173 (≥) | 43 | 12 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 412 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 779 (≥) | 126 (≥) | 21 | 34 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 689 | 182 | 166 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| ALLOY 301 | UNS | USA | An age-hardened alloy that combines the excellent corrosion resistance characteristics of Nickel 200 with the added advantages of greater strength and hardness. |