Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Whole 34CrNiMo6 Enquiry | Print this page
Whole 34CrNiMo6 Details
Whole 34CrNiMo6 Standard Download
34CrNiMo6 Datasheet
Whole 34CrNiMo6| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Structural Steel | 34CrNiMo6 | - , EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.30 | 0.38 | ||
| Si | - | 0.40 | ||
| Mn | 0.50 | 0.80 | ||
| P | - | 0.035 | ||
| S | - | 0.035 | ||
| Cr | 1.30 | 1.70 | ||
| Ni | 1.30 | 1.70 | ||
| Mo | 0.15 | 0.30 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 176 (≥) | 224 (≥) | 32 | 22 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 424 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 928 (≥) | 876 (≥) | 23 | 41 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 898 | 332 | 223 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 34CrNiMo6 | AFNOR | France | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| 34CrNiMo6 | Whole | Whole | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |