JIS Z10 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | Z10 | JIS | Japan |
Chemical composition % of the ladle analysis of grade Z10
| W(%) | Co(%) | Other(%) |
|---|---|---|
| 85-95 | 5-15 | Ti,Ta(Nb)(%): 0-3② |
Hardness quartile HRA: 91
Bending strength frequency/MPa:1275
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 241 (≥) | 135 (≥) | 42 | 33 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 811 (≥) | 258 (≥) | 23 | 31 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 228 | 674 | 164 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z10CNDA15-07 | JIS | Japan | Stainless steels for general purposes. Plates, wide strips and strips |
| Z10NC32-21 | JIS | Japan | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
| Z10C3 | JIS | Japan | Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod |
| Z100CD17CI | JIS | Japan | Iron and steel. Cutlery stainless steel |
| Z10CNWT17-13B | JIS | Japan | Steel tubes. Seamless austenitic steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical conditions of delivery |
| TUZ10CNWT17-13B | JIS | Japan | Steel tubes. Seamless austenitic steel tubes for use at high temperatures. Dimensions (with normal tolerances). Technical conditions of delivery |
| Z10CNT18-11 Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| Z100CD-17 Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| ACIER DUR AU CARBONE ETIRE Air 9160/C | JIS | Japan | wrought steels used in aeronautical constructions |
| Z10CNW17 | JIS | Japan | Corrosion Resisting Alloy AFNOR Z10 CNW17 |