CNS Martensite 616 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | Martensite 616 | CNS | China |
Chemical composition % of the ladle analysis of grade Martensite 616
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) | W(%) |
|---|---|---|---|---|---|---|---|---|---|
| 0.20-0.25 | Max 0.50 | 0.50-1.00 | 0.04 | 0.03 | 11.0-13.0 | 0.50-1.00 | 0.75-1.25 | 0.20-0.30 | 0.75-1.25 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 824 (≥) | 538 (≥) | 44 | 33 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 264 (≥) | 262 (≥) | 34 | 42 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 748 | 678 | 343 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 176 S42200 | CNS | China | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| A 565 S42200 | CNS | China | Martensitic Stainless Steel Bars for High-Temperature Service |
| S42200 | CNS | China | Martensitic Chromium Molybdenum Nickel Wolfram Stainless Steel (422) |
| 616 | CNS | China | Martensitic Stainless Steel Bars for High-Temperature Service |
| A 959 Type 616 | CNS | China | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| SUH 616 | CNS | China | Heat-resisting steel bars and wire rods |
| STR616 | CNS | China | Heat - resisting steel bars |
| SUH616 | CNS | China | CNS standard heat resistant steel bar steel grade and chemical composition |
| SNCM 616 | CNS | China | Low-alloyed steels for machine structural use manufactured by hot rolling, hot forging and hot extruding |
Relevant products
Martensite 616 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |
| Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry |