CNS Austenitic 37 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | Austenitic 37 | CNS | China |
Chemical composition % of the ladle analysis of grade Austenitic 37
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | N(%) |
|---|---|---|---|---|---|---|---|
| 0.15-0.25 | Max 1.00 | 1.00-1.60 | 0.04 | 0.03 | 20.5-22.5 | 10.0-12.0 | 0.15-0.30 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 859 (≥) | 649 (≥) | 12 | 31 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 485 (≥) | 243 (≥) | 42 | 33 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 443 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 628 | 328 | 954 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH4037 | CNS | China | Classification and designation for superalloys and high temperature intermetallic materials |
| S37000 | CNS | China | Austenitic Chromium Nickel Molybdenum Titanium Stainless Steel |
| X65Cr13 | CNS | China | Stainless steels for rolled and forged products |
| 1.4037 | CNS | China | Stainless steels for rolled and forged products |
| SUH 37 | CNS | China | Heat-resisting steel bars and wire rods |
| X1CrNiMoCuN25-25-5 | CNS | China | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4537 | CNS | China | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 416S37 | CNS | China | Specification for wrought steels for mechanical and allied engineering purposes. Bright bars for general engineering purposes |
| 420S37 | CNS | China | Specification for wrought steels for mechanical and allied engineering purposes. Bright bars for general engineering purposes |
| 2S.137 | CNS | China | Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm) |
| S.537 | CNS | China | Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel sheet and strip (500 MPa) |
| X12CrMnNiN17-7-5 | CNS | China | Stainless steel strip for springs - Technical delivery conditions |
| 1.4372 | CNS | China | Stainless steel strip for springs - Technical delivery conditions |
| X2CrMnNiN17-7-5 | CNS | China | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 1.4371 | CNS | China | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| X12CrMnNiN18-9-5 | CNS | China | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| 1.4373 | CNS | China | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| X1CrNiMoCuN25-25-5 | CNS | China | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4537 | CNS | China | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 37X12H8Γ8MΦ | CNS | China | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
Relevant products
Austenitic 37 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 1.2379 ESR Round Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry |