AS 430F Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 430F | AS | Australia |
Chemical composition % of the ladle analysis of grade 430F
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| 0.08 | 1 | 1.25 | 0.06 | 0.15 -0.35 | 16.0-18.0 | Max 0.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 549 (≥) | 588 (≥) | 13 | 21 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 734 (≥) | 549 (≥) | 13 | 23 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 775 | 689 | 976 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 314 S43020 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 S43020 | AS | Australia | Stainless Steel Forgings |
| A 581 S43020 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S43020 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S43020 | AS | Australia | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class F1-45 S43020 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class F1-60 S43020 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class F1-45 S43020 | AS | Australia | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S43020 | AS | Australia | Ferritic Chromium Free-Machining Stainless Steel |
| A 314 S43023 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 S43023 | AS | Australia | Stainless Steel Forgings |
| A 581 S43023 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S43023 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S43023 | AS | Australia | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| S43023 | AS | Australia | Ferritic Chromium Free-Machining Stainless Steel |
| STS430F | AS | Australia | Free - machining stainless steel wire and wire rods |
| STS430FSe | AS | Australia | Free - machining stainless steel wire and wire rods |
| 430F | AS | Australia | Stainless steel wire rods |
| 1.4104, X14CrMoS17, AISI 430F | AS | Australia | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |