AS 303 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 303 | AS | Australia |
Chemical composition % of the ladle analysis of grade 303
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| 0.12 | 1 | 2 | 0.06 | 0.15-0.35 | 17.0-19.0 | 8.00-10.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 924 (≥) | 249 (≥) | 43 | 13 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 757 (≥) | 735 (≥) | 13 | 23 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 222 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 329 | 741 | 819 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH3030 | AS | Australia | Classification and designation for superalloys and high temperature intermetallic materials |
| GH3039 | AS | Australia | Classification and designation for superalloys and high temperature intermetallic materials |
| 303 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 314 303 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 303 | AS | Australia | Stainless Steel Forgings |
| A 581 Type 303 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 Type 303 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 Type 303 | AS | Australia | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| A 959 Type 303 | AS | Australia | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| A 314 S30300 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 S30300 | AS | Australia | Stainless Steel Forgings |
| A 581 S30300 | AS | Australia | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S30300 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S30300 | AS | Australia | Standard Specification for Free-Machining Stainless Steel Bars |
| F 837 Class A1-50 S30300 | AS | Australia | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F 837 Class A1-55 S30300 | AS | Australia | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F 837 Class A1-70 S30300 | AS | Australia | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F738 Class A1-50 S30300 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class A1-70 S30300 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class A1-80 S30300 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
